2022 Nissan Frontier Owner’s Manual — CRUISE CONTROL (if so equipped)

PRECAUTIONS ON CRUISE CONTROL 1. CANCEL switch 2. ACCEL/RES switch 3. COAST/SET switch 4. ON/OFF switch • If the cruise control system malfunctions,

it cancels automatically. The (green) indicator illuminates in the vehicle infor- mation display then blinks to warn the driver.

• If the (green) indicator blinks, push the ON/OFF switch off and have the sys- tem checked. It is recommended that you visit a NISSAN dealer for this service.

• The (green) indicator may blink when the ON/OFF switch is pushed ON while pushing the ACCEL/RES, COAST/ SET, or CANCEL switch. To properly set the cruise control system, use the following procedures.

WARNING Do not use the cruise control when driv- ing under the following conditions: •

When it is not possible to keep the  vehicle at a set speed. •

In heavy traffic or in traffic that varies  in speed. •

On winding or hilly roads. •

On slippery roads (rain, snow, ice,  etc.). •

In very windy areas. Doing so could cause a loss of vehicle control and result in an accident.

CRUISE CONTROL OPERATIONS The cruise control allows driving at a speed between 25 - 89 mph (40 - 144 km/h) with- out keeping your foot on the accelerator pedal.

To turn on the cruise control, push the ON/OFF switch on. The (white) indica- tor in the vehicle information display will illuminate.

To set cruising speed, accelerate the ve- hicle to the desired speed, push the COAST/SET switch and release it. The

(green) indicator in the vehicle infor- mation display will illuminate. Take your foot off the accelerator pedal. Your vehicle maintains the set speed. •

To pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle returns to the previ- ously set speed.

• The vehicle may not maintain the set speed when going up or down steep hills. If this happens, drive without the cruise control.

Starting and driving 5-51

To cancel the preset speed, use one of the following three methods: • Push the CANCEL switch; the indica-

tor in the vehicle information display goes out.

• Tap the brake pedal; the indicator goes out.

• Push the ON/OFF switch off. The indicator in the vehicle information dis- play goes out.

The cruise control is automatically can- celed and the indicator in the vehicle information display goes out if: • You depress the brake pedal while pushing

the ACCEL/RES or COAST/SET switch. The preset speed is deleted from memory.

• The vehicle slows down more than 8 mph (13 km/h) below the set speed.

• You move the shift lever to N (Neutral).

To reset at a faster cruising speed, use one of the following three methods: • Depress the accelerator pedal. When the

vehicle attains the desired speed, push and release the COAST/SET switch.

• Push and hold the ACCEL/RES switch. When the vehicle attains the speed you desire, release the switch.

• Push and release the ACCEL/RES switch. Each time you do this, the set speed in- creases by about 1 mph (1.6 km/h).

To reset at a slower cruising speed, use one of the following three methods: • Lightly tap the brake pedal. When the ve-

hicle attains the desired speed, push the COAST/SET switch and release it.

• Push and hold the COAST/SET switch. Re- lease the switch when the vehicle slows to the desired speed.

• Push and release the COAST/SET switch. Each time you do this, the set speed de- creases by about 1 mph (1.6 km/h).

To resume the preset speed, push and release the ACCEL/RES switch. The vehicle returns to the last set cruising speed when the vehicle speed is over 25 mph (40 km/h).